Common Air Conditioner’s Parts

 

If your house has an air conditioner, you can earn some brief knowledge about different parts of your AC. Although it does not make you eligible for repairing your system, you are well aware of the problems your system has. The knowledge helps you understand an air conditioner’s issue perfectly. If you need Air Conditioning Repair Service in LongIsland, you will get many names for your services. But, choose the best company because any mistake in installation or repair can cause huge damage to your air conditioner.

Here, we talk about five primary parts of your air conditioner, and they are:

1. Refrigerant:

It is a fluid needed for the cooling and freezing technology of your system. It works in a closed loop and absorbs heat from the inside, and sends it to the outside. It changes its state from liquid to vapor as the temperature changes. It travels through the cooling tubes and copper coils and connects the inside unit to the outside. It also absorbs heat and pushes the heat outdoors. When the refrigerant releases heat outdoor, itcoms back to its liquid state. When it gets cold again, an indoor fan of your air conditioner releases the cold air. Sometimes, your AC runs with low refrigerant levels due to leakage. Call an expert for your air conditioning service. You can book Air Conditioning Repair service in Long Island, Northport, Smithtown, and other parts of New York.

2. Compressor:

A compressor is also another important part of your air conditioner. It compresses the refrigerant to heat up. When the substance becomes hotter than the outside temperature, it travels to the outdoor unit for releasing the heat outdoor. So, your air conditioning system needs a compressor to increase its pressure and temperature. 

3. Condenser Coil:

This part stays in the outdoor air conditioning unit. This part receives high pressure and temperature refrigerant coming from the compressor. It works opposite the evaporator coil. The evaporator coil receives cold refrigerant, whereas the condenser coil receives hot refrigerant. The refrigerant releases heat to the outdoor air using the condenser fan. When the heat leaves the refrigerant, it turns back into a liquid state and flows to the expansion valve. 

4. Expansion valve:

When the refrigerant leaves the condenser coil, it has already turned into a liquid state but remains too hot to enter the evaporator coil. Before the evaporator coil, the temperature of your refrigerant must be cold. It follows the same rule as it states that when pressure decreases, the temperature decreases also. The expansion valve reduces pressure from your refrigerant and cools down its temperature. The refrigerant changes its state from liquid to vapor gas and travels to the evaporator coil.

5.  Evaporator coil:

It is an important part of your air conditioner. The coil absorbs the heat from the inside of your house. The copper tubes receive liquid refrigerant from the expansion valve. Your indoor air gets cold when it blows over the cold coil. When refrigerant absorbs heat from the air, it turns into a vapor state.

So, these are the primary parts of your air conditioner. These details will help you learn more about how your air conditioner works. If your air conditioner develops a problem, you can book our Air conditioner repair services in Northport and other parts of New York. CallJetAirCo and get prompt service from us. 

 

Easy Ways To Maintain Your AC In Long Island

 

Long Island in New York has a summer season where you need to use your air conditioner to keep the temperature cool and comfortable. We have suggested best practices to maintain your air conditioner to get the best cooling.

The temperature of Long island is primarily cold, but July is the driest month. The month also records the highest sunshine. Using air conditioners in Long Island is not new. It is one of the densely populated areas of New York, and the temperature fluctuates depending on the weather. JetAirCo is a reputed air conditioning repairing company in Long Island and offers services in other areas, including Northport, Smithtown, and more. If you have an air conditioner, you can perform a few things to enhance the functions of your AC. If you need any help in air conditioning maintenance in Long Island, please contact JetAirCo.

Ways to improve the functions of your AC:

We discuss here a few ways that you can perform for enhancing the efficiency of your AC. These tips are simple, and you can easily maintain them.

Keep the doors and windows closed:

On hot summer days, keep the doors and windows closed to ensure no hot air comes in, and no conditioned air escapes. This way, you can feel maximum comfort without increasing your energy consumptions. When the environment remains hot, your air conditioner also runs harder to make it comfortable, increasing energy consumptions. So, closing the doors and windows will help you keep the inside temperature perfect for you.

Check air leaks:

You must check air leaks on your doors and windows. If you find any leaks, use weather-stripping to block the leak, and enjoy a cool temperature.

Keep the thermostat reasonable:

You may tend to keep the temperature down on your thermostat, but keeping it reasonable will be more helpful for you. Ask an expert about your thermostat setting; you will get to know what the temperature should be on summer days. JetAirCo is an experienced HVAC company offering air conditioning maintenance services in Long Island. If you live in New York, you will get a prompt response from your air conditioner.

Use blinds and curtains:

Use blinds and curtains to keep the temperature cool even without using your AC. A dark environment on hot days may help you stay cool. Use blinds and curtains to block sun rays from entering your house.

Use fans:

If you have a ceiling fan, you can use it to keep the temperature down inside. When you run your fan, it also reduces the demand for your air conditioner. When you use a fan while running your AC, it distributes the cool air in every corner of your house fast.

Keep heat-producing appliances away from your thermostat:

When you have heat-producing appliances near your thermostats, it signals your thermostat that the temperature needs more cooling, which forces the system to run longer.

Schedule maintenance and repairs:

Your air conditioner needs proper maintenance that you cannot perform on your own. The technical parts must be handled by an expert. You can contact JetAirCo and book the air conditioning maintenance service.  We also offer Commercial Air Conditioning Maintenance. No matter whatever problem you have with your HVAC systems, we have the best solution.

JetAirCo is a trusted company offering the best air conditioning services for your residential and commercial places. Please contact us to know more.

Oil Boiler Tune-up Advantages and Tactics

An oil boiler works fundamentally the same as a route to gas fuel. For this situation, the oil is touched off in the burning chamber, and a warmth exchanger heats cool water, either from the mains in a combi framework or from a water tank in a common framework.

However, with time, your oil burner will accumulate dust, dirt, and loosen particles that can negatively affect your heating system's efficiency and performance.  Fortunately, if you live near Hauppauge, Smithtown, Northport, and Long Island, located in New York, give JetAirCo Oil Burner Service a call and enjoy hot air during the cold months.

Benefits of Oil Burner Tune-Up

Following are the benefits you will get if you well-maintain your oil burner heating system.

1.   Reduce Costs

This is probably the biggest benefit you will get if you follow the annual maintenance of your heating system and hire the best service center, such as JetAirCo Heating System Maintenance. Remember that your system takes longer to produce hot air when you haven't well-maintained your heating system and keep the air filters clean. It will also increase the utility bills. As per a recent survey, homeowners who well-maintain their heating system pay 30% lower utility bills than others.

2. Increases the Comfortable Level

When you decide to have your burner turned up each fall, professionals will thoroughly inspect for wear & fear. Technicians will quickly identify the minor issues before things become worse. Hence, we suggest hiring a professional expert like JetAirCo Oil Burner Service after every two months and getting the highest performance from your heating system.

3. Your Family Member's Safety

 As the oil burner generally operates at a high temperature; hence, it's crucial to inspect your oil burner at least twice a month thoroughly. Otherwise, your heating system might create carbon monoxide gas which will not be suitable for your family members. Unfortunately, if you notice that your oil burner system releases carbon monoxide, instantly call JetAirCo Heating Repairs Service and give safety to your loved ones.

Oil Burner Tips to Home Owners

Besides hiring a professional, there are lots of things you can do to add years to your heating system's lifecycle, such as regular check the air filter and air ducts. Also, if possible, then try to replace the air filter after every 2 to 3 months. Unfortunately, many times you don't have any option left other than replacing your oil burner system. If you experience any of the given conditions, then it's time to replace your heating system.

1.    You have used your heating system for more than seven years.

2.    Hear unwanted sounds from your oil burner.

3.    You frequently repair your system.

Conclusion

An oil burner tune-up can give you more comfortable. So, if you live near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Oil Burner System service center and get the best heating system in the USA.

The Difference Between Boilers and Furnace

 

Selecting the right heating system for your place is essential as numerous things are involved in the method. For instance, your apartment or house's size, repairing costs, the environment you live in, and several other things.  To identify the best heating system for your purpose, it's essential to consider how efficiently each system works.

 

At JetAirCo oil furnace and boiler installation and repair service, we continuously try our best to help buyers make this important choice. That's why here we have put this short guide to help you in selecting procedures.

 

Definition of Boiler :

Boilers produce warm air via the heated water in the tank.  This heating system doesn't need air ducts to distribute warm air as through the pipes located inside the home, heated water is circulated. And this process is commonly known as radiant heating. Two types of boilers are available in the market:  Electrical boiler and Gas boiler.

 

 Electric heaters come with heating elements in order to heat the water.  On the other hand, a gas boiler uses the radiant heating method to transfer heat and warms your residence's nearby location.

Definition of Furnace :

Both Electric and Gas furnaces are air-forced systems.  These heating systems combust fuel if you use a gas furnace or generate heat if you use an electric furnace and circulate the heat through air ducts. This heating system also used blower fans to distribute the warm air inside your house.

 

Comparison between Furnace and Boiler :

●     A boiler warms a home through the circulation of hot water, and there's no need for air ducts. In a furnace, the air is heat and distributed via the air vents and air ducts.

 

●     The boiler's heating procedure is known as radiant heating. In contrast, the furnace's heating method is known as air forced heating.

 

●     Furnaces can quickly heat your residence. On the other hand, boilers will take much time to warm up; however, the duration will be longer.

 

●     If you use the furnace, then you need to replace the air filter once a month. Moreover, the furnace heating system needs more maintenance and repairs than the boiler. Simultaneously, having a boiler means the risk of pipe damage, which doesn't appear in the furnace.

 

●     When it comes to indoor air quality, boilers get the advantages as this heating system doesn't come with air ducts and vents. However, in the furnace, ducts, and vents gather dust and loosen particles that reduce the indoor air quality.

 

Which one is Better?

Both furnace and boiler come with some unique pros and cons. Having a clear idea about their work and how they differ from each other will help you decide which one will suit you.

 

However, if you already have air ductwork or your house isn't set up for radiant heating, you must use a furnace heating system.

Get Professional Assistance….

Whether you decide to go with a boiler or a furnace, proper installation is necessary to work the heating system at its highest efficiency. And you must take professional help to install or maintain your boiler or furnace. Do you live near Hauppauge, Smithtown, Northport, and Long Island, New York? Then connect with JetAirCo oil furnace and boiler installation and repair service center and check what you will get from us. 

Clogged Filter Is a Common Furnace Problem

 

When your furnace does not produce enough heat for your comfort, you can guess that something is wrong with your furnace. If you know your furnace's technical parts, you can check your system to identify the real issue. But, a furnace expert is the best person to handle any problem with your furnace. A clogged filter can be the reason for the poor performance of your heating system. Call JetAirCo and fix an appointment immediately. We will reach your place and offer services that will solve the issue immediately.

The company is a renowned name in New York for offering HVAC services. No matter what system you have, experts are there to handle any issues correctly. Our satisfied customers promote us by sharing their experiences. So, if you also have any issues with your HVAC system, contact us. We are active in areas like Hauppauge, Smithtown, Northport, and more.

If your furnace does not perform as perfectly as it did, the time has come to check a few things about your furnace. Start with your filter. A blocked filter often reduces the performance of your system.

When you ignore the maintenance of your system, you can experience such problems. Clearing filter does not require too much time. It is the simplest job that you can do for the wellness of your system. Taking a regular look at the maintenance will enhance the efficiency of your system.

If you want to protect your system, replacing your air filter often is the best solution.

Locate your filter:

Identify your furnace filter first. Different systems have different positions for the filter. This looks like a grate in the floor. Some furnaces have their filter inside of the system.

Check the filter:

Hold your filter to the light. If the light does not come through it, you need to clean your filter or replace it with the new one. Sometimes, you get a dirty smell from the vents, which is also a sign for the filter replacement.

Replace your filter:

If you are replacing your filter on your own, check the direction when installing. A wrong installation can reduce the efficiency of your system.

When you have a clogged filter, the air handler takes the load and works harder for distributing the heat. It increases your energy consumption bill. This problem also overheats the heat exchanger, and your system will shut off in a short time.

Proper maintenance of your system saves both your time and money both. It protects your system from any severe damages and takes care of your comfort very well.

JetAirCo comes up with the right solution for your furnace. No matter you need an installation or a repair, our experts have the preferred solution for you. We are offering services in Hauppauge, Smithtown, and Northport. If these places are close to you, you can contact us for your furnace repair and maintenance.

What To Do When Your Furnace Is Not Working

 

In the winter, you need a cozy environment inside your house. When the temperature outside is chilling, your furnace keeps your room temperature comfortable and protects you from the freezing weather. But, what if your furnace stops working? It will create a nightmare like situation. So, always maintain your furnace properly to ensure that there is no fault. JetAirCo is a renowned company offering HVAC services for your systems. We have a branch in Long Island, New York, but we are active in areas like Hauppauge, Smithtown, Northport, and other areas of New York.

If you have any issues with your furnace and boilers in Smithtown, you can consult with JetAirCo. We take no time to visit your place and fix the issues as immediately as possible. Our experts shared their experiences when it comes to the maintenance of your furnace. Most of the problems can easily be handled by homeowners. So, we want you to check everything regarding your furnace before calling a professional for this job.

Check the filter:

If your furnace runs but stops without giving you the needed temperature, a dirty filter can be the reason for it. A filter collects dirt and other pollutant and keeps the air quality high. But, when the filter gets clogged by the dust, it disturbs the airflow and your room temperature. So, if you do not get a satisfactory temperature from your furnace, you can check the filter and clean it yourself.

Check the fuse box, circuit breaker, or switches:

If you don’t get any sound from your furnace, the problem can be with your fuse box, circuit breaker, or switches. Ensure that there is an uninterrupted power supply to your furnace. Our experts believed that a broken power supply is the only reason that stopped furnaces. There is nothing faulty in the system. If you need professional help since you don’t have any technical knowledge, call JetAirCo. We are offering gas furnace repair services in Northport, Smithtown, and other areas of New York.

Inspect the thermostat:

Check your thermostat setting and ensure that it is set in the heat mode. If your thermostat sets in cool or off mode, it will not work. So, before calling a professional, check your thermostat for it.

If you are not sure about the technical faults and are scared of checking them yourself, call JetAirCo and find the right solution. No matter which type of furnace you have, JetAirCo will always attend to your problems and give you the right solution. For any issues with your HVAC systems, our professionals will visit your place and carry out the required job to bring you back the cozy weather inside your house.

What Should You Do When Your Heat Pump Won’t Turn On

 

If your heat pump suddenly stops in the chilling winter weather, feeling helpless is the very common thing and it puts you in worry about how to solve the issue. It is a serious problem and it needs immediate attention from a professional. You cannot keep a heating problem unattended. JetAirCo is offering heating system repair and maintenance service in Long Island and Hauppauge. If you are living in New York, you can easily contact us. We reach your place and fix the issue, without taking much time.

When your heat pump suddenly breaks down, there are many underlying causes for it. We will discuss it, one by one. This blog helps you understand the possible cause of your heat pump’s sudden failure. Contact JetAirCo and find out the reasons why your heat pump stops performing. We are active in areas like Smithtown, Northport, Hauppauge, and Long Island.

Our experts share their experience for the possible reasons for your heat pump failure.

Thermostat issue:

You must check your thermostat first if your heating system stops suddenly. Many a time, it is the faults of thermostats. Check whether your thermostat is set correctly. If you are using a programmable thermostat, ensure that the time is set correctly to get the right heat at the needed time. If your thermostat has no issue, the faults may be caused by the miscalibration that directs your thermostat wrongly to read the temperature. The electrical issue might be there that can cause problems with your heat pump. The power cut can disconnect the connection between the thermostat and the heat pump.

So, hire a professional who checks the problem and fix them as per the demands. Contact JetAirCo and let professionals solve the problems.

Power loss:

Your heat pump can trip the circuit breakers. You must check the fuse box to find out the problems. If the problem is persistent, it can be electrical faults.

Start capacitor:

Hear the sound from the cabinet of your heat pump. If you hear a clicking sound from the cabinet, it can be the reason for the failure of the start capacitor. This part transfers the electrical charge to start the motor of your heating system. You need an expert to take care of the issue.

Problem with the reversing valve:

The reversing valve is mainly responsible for changing the direction of refrigerant for cooling or heating your environment. If you will get cool air instead of the hot air from your heatingsystem, it is the problem with the heat pump.

So, these are some of the reasons that make your heat pump work poorly or the failure of the heat pump. Contact JetAirCo for the heating system maintenance and repair service in Hauppauge and Smithtown. We have a branch in Long Island, New York.